|
 | | On Sale
Now only: $239.99
The IPCAMW45 combines all the features of much more expensive Internet Cameras into a cost effective solution for your surveillance systems needs. The IPCAMW45 can be accessed and controlled by a variety of methods, including; Internet Explorer 5.0 and above, Real Player 10.5, Quick Time 6.5, Packet Video Player 3.0 and Cell Phones with 3GPP capability. These options, coupled with the built-in microphone, allow you to listen and watch remotely while the W45 captures audio and video at your camera locations. The IPCAMW45 is equipped with built-in PoE (Power over Ethernet) and follows the Universal Plug & Play (UPnP) allowing Windows XP/ME computers to automatically recognize the W45 and add it to the network. Your home or business surveillance and security solution can be further enhanced by configuring the included 16 camera monitoring and recording software, which offers both motion detection and scheduled recording of up to 16 4XEM Internet Cameras. This advanced software allows you to archive video on your PC hard drive while the built-in Web-based interface allows you to easily monitor and control your camera from remote locations. |
|
|
 | | On Sale
Now only: $79.99
The Power Over Ethernet (POE) Kit from 4XEM⢠integrates data and power over standard Ethernet cabling. It ensures uninterrupted power to network cameras in hard to access places using Category 5 cable. The POE Kit consists of an Injector that connects to an Ethernet Switch or Hub and to AC Power, and a Splitter that connects to the DC Jack and RJ-45 port of the Network Camera. A Cat-5 cable runs between the Injector and Splitter to a maximum of 100 meters. One POE Kit is required per Network Camera. The Power Over Ethernet technology eliminates the necessity of installing separate power cabling and AC outlets for each network camera. |
|
|
 | | On Sale
Now only: $279.99
The IPCAMWPTS Pan/Tilt IP Network Camera from 4XEM⢠is a full-featured surveillance system that provides high quality video. It can be accessed and controlled by a variety of methods, including Internet Explorer 5.0 and above, Real Player 10.5, Quick Time 6.5, Packet Video Player 3.0 and Cell Phones with 3GPP capability. These options, coupled with the built-in microphone, allow you to listen and watch remotely while the WPTS captures audio and video at your camera locations. The included 16 camera monitoring and recording software, offers both motion detection and scheduled recording of up to 16 4XEM Internet Cameras. It also allows you to archive video on your PC hard drive while the built-in Web-based interface allows you to easily monitor and control your camera from remote locations. The camera comes bundled with CAT5 ethernet cable, power adapter, mounting kit. Offering 30 frames/second in full VGA resolution, the IPCAMWPTS ensures clear home or business surveillance. Incorporating a number of status indicators, the camera provides comfortable control of the device. |
|
|
 | | On Sale
Now only: $339.99
The WLPTS Wireless Pan/Tilt IP Network Camera from 4XEM⢠is ideal for applications in wireless communication which require Pan/Tilt functionality for surveillance areas that are larger than the viewing span of one stationary IP camera. The network camera lets you access and control your audio and video through the Internet Explorer 5.0 and above, Real Player 10.5, Quick Time 6.5, Packet Video Player 3.0, and Cell Phones with 3GPP capability. It features a 1/4" CMOS Image Sensor, MPEG 4 video compression, 802.11g Wireless Communication, a built-in microphone and a motorized Pan/Tilt with enhanced image quality. With motion detection feature, the camera triggers still image to capture and send the image via e-mail or to an FTP location. . The built-in intelligent motion detection lets you avail improved performance for your surveillance needs. It includes bundled software that allows monitoring and recording of up to 16 Cameras from any web browser, and the quick and simple installation means you will be up in minutes viewing streamed video. |
|
|
 | | On Sale
Now only: $299.99
Safeguard your IP Network Cameras using Protective Camera Enclosure from 4XEMâ¢. With a heated and cooled steel camera enclosure, protect your cameras from physical damage and extreme temperature. Equipped with fan and heater, this enclosure can be used with IPCAMWPT, IPCAMWPTZ cameras and other PTZ Cameras. |
|
|
 | | On Sale
Now only: $619.99
The PTZ Pan/Tilt/Zoom Wired IP Network Camera from 4XEM⢠is a compact TCP/IP network remote video/audio surveillance system. The camera delivers high image quality at resolutions of up to 704x480 pixels using a high-resolution CCD imager. The built-in 10X optical zoom and pan/tilt functionality gives you a great range of view. With connections available for an external microphone and for audio output, it enables two-way audio communication. Its motion detection feature triggers still image capture and sends the image via e-mail or to an FTP location. Plus it comes bundled with software that allows monitoring and control of up to 16 IP Cameras from any web browser, and the quick and simple installation means you will be up in minutes viewing streamed video. The PTZ IP Network Camera is ideal for demanding applications that require connection to external alarms, two-way audio and Pan/Tilt/Zoom functionality for surveillance areas that are larger than the viewing span of one stationary IP camera. |
|
|
 | | On Sale
Now only: $179.99
Safeguard your IP Network Cameras using IPCAMENCLOHF Protective Camera Enclosure from 4XEMâ¢. With a heated and cooled steel camera enclosure, protect your cameras from physical damage and extreme temperature. Equipped with fan and heater, this enclosure can be used with IPCAMW-2100, IPCAMW40, IPCAMW50, IPCAMW60, IPCAMW70 and IPCAMW80, as well as CCTV and IP Network Cameras by other manufacturers. |
|
|
 | | On Sale
Now only: $119.99
The Netgear's FS108P ProSafe 8-Port Fast Ethernet Switch with 4-Port Power over Ethernet (PoE) provides power and data from a single point over a single Cat-5 cable. You can choose to plug in up to eight Ethernet or Fast Ethernet devices and mix in up to four 802.3af IP-based devices like wireless access points or IP-based network surveillance cameras with it. Featuring eight 10/100 RJ-45 ports, the switch offers plug-and-play connectivity â eliminating the need for any software configuration. Easy and reliable, the ProSafe FS108P automatically determines PoE requirements, speed, duplex, and cable type using the AutoUplink⢠feature. With data switching and a four-port Power over Ethernet integrated in one unit, the FS108P saves space, reduces cables and eliminates the requirement for dedicated electrical outlets â simplifying installation of PoE-capable devices. |
|
|
 | | On Sale
Now only: $3529.99
Summit X450e is based on the revolutionary ExtremeXOS core-class operating system from Extreme Networks. ExtremeXOS is a highly resilient, modular operating system that provides continuous uptime, manageability and operational efficiency. Summit X450e provides high availability and performance with its advanced traffic management capabilities to support large scale rollout of converged network that supports devices such as IP telephones, wireless APs and other devices that require power from a LAN connection. With low-latency line-rate performance, Summit X450e supports the 802.3af standards-based PoE on every port. The highly flexible Summit X450e switch provides high-density gigabit plus optional 10 Gigabit Ethernet ports in a compact 1RU format, supporting a full range of Layer 2 to Layer 4 functionalities on every port for high productivity. |
|
|
 | | On Sale
Now only: $449.99
Access business critical servers, perform maintenance and troubleshoot your network from virtually anywhere using SecureLinx Spider⢠1-Port Remote KVM-over-IP with USB connectors from Lantronix®. Offering secure server access over standard IP network, it provides continuous availability to servers with 1:1 non-blocked access. Additionally, you can even add remote IP userâs one server port at a time, rather than adding another switch. This KVM-over-IP features powerful ARM based processor, on-board memory (Flash, Video and CPU SDRAM), secure operating system, web server and intelligent power management. It also includes a video encoder and embedded Ethernet switch with built-in support for Virtual Media, conveniently integrating a serial interface and second Ethernet port, allowing hardware connections to all commonly used out-of-band management interfaces.This digital IP-based KVM switch is about the size of a small chalkboard eraser and weighing and does not consume any valuable rack space. Light enough to be cable-supported from the back of server, it can be powered directly from the attached server with no need for external power supply. Easily integrating into a total remote OOB management strategy including serial console management, remote power management and consolidated management access including auto-discovery, access control and logical device grouping, this switch is an ideal network management accessory. |
|