|
|  | | On Sale
Now only: $199.00
The Apple Drive Module (ADM) is a hot-pluggable hard drive in a special drive carrier module designed for easy server upgradeability and maintenance. Apple Serial ATA Drive Modules are available in capacities up to 1TB and operate at 7200 rpm. The 80GB drive is equipped with 8MB of disk cache. The 1TB drive uses perpendicular recording technology to achieve greater capacity while increasing performance and is equipped with 16MB disk cache. Both drives are 24x7 server-class rated and are ideal for applications needing capacity and great storage value with excellent performance. Using up to three drive modules, the Xserve can be configured from 80GB to 3TB of internal storage. Unpopulated bays ship with a blank drive carrier which can be replaced with a drive module at any time even if the server is running so its easy to add storage capacity as your server needs grow. Each ADM has two LED activity lights one indicating drive activity and one indicating drive status. All Apple Drive Modules support SMART Self Monitoring and Reporting Technology - allowing the hardware monitoring tools including with Xserve to monitor the status of each hard drive and report pre-failure warnings before problems occur. Software and Hardware RAID options Mac OS X Server includes AppleRAID, providing RAID 0 and 1 support through software, allowing you to increase either data redundancy or performance. Xserve features on-line rebuilding of RAID 1 volumes and is able to boot from RAID volumes. Choose any combination of mirroring or striping across the three drive bays. RAID configurations require a minimum of two ADM hard drives. For increased protection and performance, add the Xserve RAID card to your Xserve, which provides hardware RAID 0, 1 and 5 with 256MB of cache and a 72-hour cache battery backup. Serial ATA hard drives Serial ATA hard drives combine low cost with excellent performance. Serial ATA drives features a point-to-point interconnect to that each drive is electrically isolated from the other and multiple drives don't compete for bandwidth. The drives have 8MB or 32MB of disk cache, operate at 7,200 revolutions per minute (rpm) and use a protocol that enables fast data transfer to and from the hard drive 1.5 gigabytes of data per second. Apple Drive Module Serial ATA Compatibility These Serial ATA Apple Drive Modules are qualified for use only with the Intel-based Xserve. For drive module compatibility with other Xserve systems, please see http://docs.info.apple.com/article.html?artnum=107569 |
| |  | | On Sale
Now only: $449.00
The Apple Drive Module (ADM) is a hot-pluggable hard drive in a special drive carrier module designed for easy server upgradeability and maintenance. Apple Serial ATA Drive Modules are available in capacities up to 1TB and operate at 7200 rpm. The 80GB drive is equipped with 8MB of disk cache. The 1TB drive uses perpendicular recording technology to achieve greater capacity while increasing performance and is equipped with 32MB disk cache. Both drives are 24x7 server-class rated and are ideal for applications needing capacity and great storage value with excellent performance. Using up to three drive modules, the Xserve can be configured from 80GB to 3TB of internal storage. Unpopulated bays ship with a blank drive carrier which can be replaced with a drive module at any time - even if the server is running - so its easy to add storage capacity as your server needs grow. Each ADM has two LED activity lights - one indicating drive activity and one indicating drive status. All Apple Drive Modules support SMART - Self Monitoring and Reporting Technology - allowing the hardware monitoring tools including with Xserve to monitor the status of each hard drive and report pre-failure warnings before problems occur. Software and Hardware RAID options Mac OS X Server includes AppleRAID, providing RAID 0 and 1 support through software, allowing you to increase either data redundancy or performance. Xserve features on-line rebuilding of RAID 1 volumes and is able to boot from RAID volumes. Choose any combination of mirroring or striping across the three drive bays. RAID configurations require a minimum of two ADM hard drives. For increased protection and performance, add the Xserve RAID card to your Xserve, which provides hardware RAID 0, 1 and 5 with 256MB of cache and a 72-hour cache battery backup. Serial ATA hard drives Serial ATA hard drives combine low cost with excellent performance. Serial ATA drives features a point-to-point interconnect to that each drive is electrically isolated from the other and multiple drives don't compete for bandwidth. The drives have 8MB or 32MB of disk cache, operate at 7,200 revolutions per minute (rpm) and use a protocol that enables fast data transfer to and from the hard drive -- 1.5 gigabytes of data per second. Apple Drive Module Serial ATA Compatibility These Serial ATA Apple Drive Modules are qualified for use only with the Intel-based Xserve. For drive module compatibility with other Xserve systems, please see http://docs.info.apple.com/article.html?artnum=107569 System Requirements Intel-based Xserve |
| | | | On Sale
Now only: $449.00
The Apple Drive Module (ADM) is a hot-pluggable hard drive in a special drive carrier module designed for easy server upgradeability and maintenance. Apple Serial ATA Drive Modules are available in capacities up to 1TB and operate at 7200 rpm. The 80GB drive is equipped with 8MB of disk cache. The 1TB drive uses perpendicular recording technology to achieve greater capacity while increasing performance and is equipped with 32MB disk cache. Both drives are 24x7 server-class rated and are ideal for applications needing capacity and great storage value with excellent performance. Using up to three drive modules, the Xserve can be configured from 80GB to 3TB of internal storage. Unpopulated bays ship with a blank drive carrier which can be replaced with a drive module at any time - even if the server is running - so its easy to add storage capacity as your server needs grow. Each ADM has two LED activity lights - one indicating drive activity and one indicating drive status. All Apple Drive Modules support SMART - Self Monitoring and Reporting Technology - allowing the hardware monitoring tools including with Xserve to monitor the status of each hard drive and report pre-failure warnings before problems occur. Software and Hardware RAID options Mac OS X Server includes AppleRAID, providing RAID 0 and 1 support through software, allowing you to increase either data redundancy or performance. Xserve features on-line rebuilding of RAID 1 volumes and is able to boot from RAID volumes. Choose any combination of mirroring or striping across the three drive bays. RAID configurations require a minimum of two ADM hard drives. For increased protection and performance, add the Xserve RAID card to your Xserve, which provides hardware RAID 0, 1 and 5 with 256MB of cache and a 72-hour cache battery backup. Serial ATA hard drives Serial ATA hard drives combine low cost with excellent performance. Serial ATA drives features a point-to-point interconnect to that each drive is... |
| |  | | On Sale
Now only: $449.00
The Apple Drive Module (ADM) is a hot-pluggable hard drive in a special drive carrier module designed for easy server upgradeability and maintenance. Apple Serial ATA Drive Modules are available in capacities up to 1TB and operate at 7200 rpm. The 80GB drive is equipped with 8MB of disk cache. The 1TB drive uses perpendicular recording technology to achieve greater capacity while increasing performance and is equipped with 32MB disk cache. Both drives are 24x7 server-class rated and are ideal for applications needing capacity and great storage value with excellent performance. Using up to three drive modules, the Xserve can be configured from 80GB to 3TB of internal storage. Unpopulated bays ship with a blank drive carrier which can be replaced with a drive module at any time - even if the server is running - so its easy to add storage capacity as your server needs grow. Each ADM has two LED activity lights - one indicating drive activity and one indicating drive status. All Apple Drive Modules support SMART - Self Monitoring and Reporting Technology - allowing the hardware monitoring tools including with Xserve to monitor the status of each hard drive and report pre-failure warnings before problems occur. Software and Hardware RAID options Mac OS X Server includes AppleRAID, providing RAID 0 and 1 support through software, allowing you to increase either data redundancy or performance. Xserve features on-line rebuilding of RAID 1 volumes and is able to boot from RAID volumes. Choose any combination of mirroring or striping across the three drive bays. RAID configurations require a minimum of two ADM hard drives. For increased protection and performance, add the Xserve RAID card to your Xserve, which provides hardware RAID 0, 1 and 5 with 256MB of cache and a 72-hour cache battery backup. Serial ATA hard drives Serial ATA hard drives combine low cost with excellent performance. Serial ATA drives features a point-to-point interconnect to that each drive is electrically isolated from the other and multiple drives don't compete for bandwidth. The drives have 8MB or 32MB of disk cache, operate at 7,200 revolutions per minute (rpm) and use a protocol that enables fast data transfer to and from the hard drive -- 1.5 gigabytes of data per second. Apple Drive Module Serial ATA Compatibility These Serial ATA Apple Drive Modules are qualified for use only with the Intel-based Xserve. For drive module compatibility with other Xserve systems, please see http://docs.info.apple.com/article.html?artnum=107569 System Requirements Intel-based Xserve |
| |  | | On Sale
Now only: $419.95
The Promise 750GB SATA Drive Module is a hot-pluggable 3Gb/s 7200-rpm SATA hard drive in a special drive carrier module designed for hot-swappable upgrade or replacement. Advanced active/active MUX circuitry allows the single ported SATA drive to be controlled by both RAID controllers simultaneously offering transparent failover. Serial ATA hard drives Serial ATA hard drives combine low cost with excellent performance. They feature a point-to-point interconnect to each drive, so each drive is electrically isolated from the others and multiple drives don't compete for bandwidth. The drives come with 16MB of disk cache, operate at 7,200 revolutions per minute (rpm), and use a protocol that enables fast data transfer to and from the hard drive--3 gigabits of data per second. Tiered storage in a single RAID box The Promise VTrak E-Class drive modules can be mixed inside a single RAID subsystem or in the expansion chassis allowing for flexible tiered storage configurations. 7200-rpm SATA drives deliver high capacity and excellent sequential performance for audio and video data. Promise serial ATA drive module compatibility These SATA drive modules are qualified for use with Promise VTrak E-Class RAID subsystems and VTrak expansion chassis only. Mfr. Part No.: PMEVTSATA750 Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Apple's Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service. |
| |  | | On Sale
Now only: $649.00
The Apple Drive Module (ADM) is a hot-pluggable hard drive in a special drive carrier module designed for easy server upgradeability and maintenance. Apple SAS Drive Modules are available in 73GB or 300GB capacities and operate at 15,000 rpm and are equipped with 16MB of disk cache SAS (Serial Attach SCSI) hard drives SAS drives deliver higher sequential performance (up to 125MB/s) and outstanding random access performance for the most demanding applications. Best-in-class mean time between failure (MTBF) ratings means you can trust Xserve to deliver ultimate reliability for critical server environments. SAS drives are ideal for applications requiring the highest performance, fastest random access times, and highest reliability available. SAS drive modules features a point-to-point interconnect to each drive, enabling each drive to be electrically isolated from each other so that drives don't compete for bandwidth, and utilize a protocol that enables fast data transfer to and from the hard drive -- 3.0 gigabytes of data per second. Software and Hardware RAID options Mac OS X Server includes AppleRAID, providing RAID 0 and 1 support through software, allowing you to increase either data redundancy or performance. Xserve features on-line rebuilding of RAID 1 volumes and is able to boot from RAID volumes. Choose any combination of mirroring or striping across the three drive bays. RAID configurations require a minimum of two ADM hard drives. For increased protection and performance, add the Xserve RAID card to your Xserve, which provides hardware RAID 0, 1 and 5 with 256MB of cache and a 72-hour cache battery backup. Apple Drive Module SAS Compatibility SAS Apple Drive Modules are compatible only with the Intel-based Xserve. For drive module compatibility with other Xserve systems, please see http://docs.info.apple.com/article.html?artnum=107569 |
| |  | | On Sale
Now only: $299.00
The Apple Drive Module (ADM) is a hot-pluggable hard drive in a special drive carrier module designed for easy server upgradeability and maintenance. Apple SAS Drive Modules are available in 73GB or 300GB capacities and operate at 15,000 rpm and are equipped with 16MB of disk cache SAS (Serial Attach SCSI) hard drives SAS drives deliver higher sequential performance (up to 125MB/s) and outstanding random access performance for the most demanding applications. Best-in-class mean time between failure (MTBF) ratings means you can trust Xserve to deliver ultimate reliability for critical server environments. SAS drives are ideal for applications requiring the highest performance, fastest random access times, and highest reliability available. SAS drive modules features a point-to-point interconnect to each drive, enabling each drive to be electrically isolated from each other so that drives don't compete for bandwidth, and utilize a protocol that enables fast data transfer to and from the hard drive -- 3.0 gigabytes of data per second. Software and Hardware RAID options Mac OS X Server includes AppleRAID, providing RAID 0 and 1 support through software, allowing you to increase either data redundancy or performance. Xserve features on-line rebuilding of RAID 1 volumes and is able to boot from RAID volumes. Choose any combination of mirroring or striping across the three drive bays. RAID configurations require a minimum of two ADM hard drives. For increased protection and performance, add the Xserve RAID card to your Xserve, which provides hardware RAID 0, 1 and 5 with 256MB of cache and a 72-hour cache battery backup. Apple Drive Module SAS Compatibility SAS Apple Drive Modules are compatible only with the Intel-based Xserve. For drive module compatibility with other Xserve systems, please see http://docs.info.apple.com/article.html?artnum=107569 |
| |  | | On Sale
Now only: $649.00
The Apple Drive Module (ADM) is a hot-pluggable hard drive in a special drive carrier module designed for easy server upgradeability and maintenance. Apple SAS Drive Modules are available in 73GB or 300GB capacities and operate at 15,000 rpm and are equipped with 16MB of disk cache SAS (Serial Attach SCSI) hard drives SAS drives deliver higher sequential performance (up to 125MB/s) and outstanding random access performance for the most demanding applications. Best-in-class mean time between failure (MTBF) ratings means you can trust Xserve to deliver ultimate reliability for critical server environments. SAS drives are ideal for applications requiring the highest performance, fastest random access times, and highest reliability available. SAS drive modules features a point-to-point interconnect to each drive, enabling each drive to be electrically isolated from each other so that drives don't compete for bandwidth, and utilize a protocol that enables fast data transfer to and from the hard drive -- 3.0 gigabytes of data per second. Software and Hardware RAID options Mac OS X Server includes AppleRAID, providing RAID 0 and 1 support through software, allowing you to increase either data redundancy or performance. Xserve features on-line rebuilding of RAID 1 volumes and is able to boot from RAID volumes. Choose any combination of mirroring or striping across the three drive bays. RAID configurations require a minimum of two ADM hard drives. For increased protection and performance, add the Xserve RAID card to your Xserve, which provides hardware RAID 0, 1 and 5 with 256MB of cache and a 72-hour cache battery backup. Apple Drive Module SAS Compatibility SAS Apple Drive Modules are compatible only with the Intel-based Xserve. For drive module compatibility with other Xserve systems, please see http://docs.info.apple.com/article.html?artnum=107569 |
| |  | | On Sale
Now only: $199.00
Mac Pro supports up to four 3Gb/s Serial ATA hard drives for up to 4TB of storage. The cable-free, direct-attach drive solution lets you install and remove drives in a snap. To install a drive, you connect a simple drive carrier to the hard drive, then just slide it into place no cables or connectors to hassle with. Removing the drive is just as easy. Every Mac Pro ships with four hard drive carriers. This solution is perfect if you ever share drives among different workstations at home or the studio. Requires Mac Pro and Mac OS X v10.4.9 or later. Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Apple's Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service. |
| | | | On Sale
Now only: $199.00
Mac Pro supports up to four 3Gb/s Serial ATA hard drives for up to 4TB of storage. The cable-free, direct-attach drive solution lets you install and remove drives in a snap. To install a drive, you connect a simple drive carrier to the hard drive, then just slide it into place no cables or connectors to hassle with. Removing the drive is just as easy. Every Mac Pro ships with four hard drive carriers. This solution is perfect if you ever share drives among different workstations at home or the studio. Requires Mac Pro and Mac OS X v10.4.9 or later. Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Apple's Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service. |
| |
|