|
 | | On Sale
Now only: $649.00
Mac Pro supports up to four Serial Attached SCSI 3Gb/s Serial ATA hard drives for high-performance storage. These drives are Installed in the Mac Pro hard drive bays, and the cable-free, direct-attach drive solution lets you install and remove drives in a snap. To install a drive, you connect a simple drive carrier to the hard drive, then just slide it into place -- no cables or connectors to hassle with. Removing the drive is just as easy. Every Mac Pro ships with four hard drive carriers. This solution is perfect if you ever share drives among different workstations at home or the studio. Requires Mac Pro (early 2008), Mac Pro RAID Card, and Mac OS X v10.5.1 or later. Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Apple's Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service. |
|
|
 | | On Sale
Now only: $649.00
The Apple Drive Module (ADM) is a hot-pluggable hard drive in a special drive carrier module designed for easy server upgradeability and maintenance. Apple SAS Drive Modules are available in 73GB or 300GB capacities and operate at 15,000 rpm and are equipped with 16MB of disk cache SAS (Serial Attach SCSI) hard drives SAS drives deliver higher sequential performance (up to 125MB/s) and outstanding random access performance for the most demanding applications. Best-in-class mean time between failure (MTBF) ratings means you can trust Xserve to deliver ultimate reliability for critical server environments. SAS drives are ideal for applications requiring the highest performance, fastest random access times, and highest reliability available. SAS drive modules features a point-to-point interconnect to each drive, enabling each drive to be electrically isolated from each other so that drives don't compete for bandwidth, and utilize a protocol that enables fast data transfer to and from the hard drive -- 3.0 gigabytes of data per second. Software and Hardware RAID options Mac OS X Server includes AppleRAID, providing RAID 0 and 1 support through software, allowing you to increase either data redundancy or performance. Xserve features on-line rebuilding of RAID 1 volumes and is able to boot from RAID volumes. Choose any combination of mirroring or striping across the three drive bays. RAID configurations require a minimum of two ADM hard drives. For increased protection and performance, add the Xserve RAID card to your Xserve, which provides hardware RAID 0, 1 and 5 with 256MB of cache and a 72-hour cache battery backup. Apple Drive Module SAS Compatibility SAS Apple Drive Modules are compatible only with the Intel-based Xserve. For drive module compatibility with other Xserve systems, please see http://docs.info.apple.com/article.html?artnum=107569 |
|
|
 | | On Sale
Now only: $649.00
The Apple Drive Module (ADM) is a hot-pluggable hard drive in a special drive carrier module designed for easy server upgradeability and maintenance. Apple SAS Drive Modules are available in 73GB or 300GB capacities and operate at 15,000 rpm and are equipped with 16MB of disk cache SAS (Serial Attach SCSI) hard drives SAS drives deliver higher sequential performance (up to 125MB/s) and outstanding random access performance for the most demanding applications. Best-in-class mean time between failure (MTBF) ratings means you can trust Xserve to deliver ultimate reliability for critical server environments. SAS drives are ideal for applications requiring the highest performance, fastest random access times, and highest reliability available. SAS drive modules features a point-to-point interconnect to each drive, enabling each drive to be electrically isolated from each other so that drives don't compete for bandwidth, and utilize a protocol that enables fast data transfer to and from the hard drive -- 3.0 gigabytes of data per second. Software and Hardware RAID options Mac OS X Server includes AppleRAID, providing RAID 0 and 1 support through software, allowing you to increase either data redundancy or performance. Xserve features on-line rebuilding of RAID 1 volumes and is able to boot from RAID volumes. Choose any combination of mirroring or striping across the three drive bays. RAID configurations require a minimum of two ADM hard drives. For increased protection and performance, add the Xserve RAID card to your Xserve, which provides hardware RAID 0, 1 and 5 with 256MB of cache and a 72-hour cache battery backup. Apple Drive Module SAS Compatibility SAS Apple Drive Modules are compatible only with the Intel-based Xserve. For drive module compatibility with other Xserve systems, please see http://docs.info.apple.com/article.html?artnum=107569 |
|
|
 | | On Sale
Now only: $679.95
The Promise 300GB SAS Drive Module is a hot-pluggable 3Gb/s 15,000-rpm SAS hard drive in a special drive carrier module designed for hot-swappable upgrade or replacement. The high rotational speed and quick random access of the SAS drive module reduce the time it takes to retrieve data, making it the best fit for random read/write operations in transactional data applications. SAS (Serial Attach SCSI) hard drives SAS drives deliver higher sequential performance and outstanding random access performance for the most demanding applications. And they offer best-in-class mean time between failure (MTBF: 1,400,000 hours). SAS drives are ideal for applications requiring the highest performance, fastest random access times, and highest reliability available. Tiered storage in a single RAID box The Promise VTrak E-Class drive modules can be mixed inside a single RAID subsystem or in the expansion chassis allowing for flexible tiered storage configurations. 15,000-rpm SAS drives are best utilized for mission-critical applications requiring maximum random read/write performance. Promise SAS Drive Module Compatibility These SAS drive modules are qualified for use with Promise VTrak E-Class RAID subsystems and VTrak expansion chassis only. Mfr. Part No.: PMEVTSAS300 Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Apple's Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service. |
|
|
 | | On Sale
Now only: $299.00
The Apple Drive Module (ADM) is a hot-pluggable hard drive in a special drive carrier module designed for easy server upgradeability and maintenance. Apple SAS Drive Modules are available in 73GB or 300GB capacities and operate at 15,000 rpm and are equipped with 16MB of disk cache SAS (Serial Attach SCSI) hard drives SAS drives deliver higher sequential performance (up to 125MB/s) and outstanding random access performance for the most demanding applications. Best-in-class mean time between failure (MTBF) ratings means you can trust Xserve to deliver ultimate reliability for critical server environments. SAS drives are ideal for applications requiring the highest performance, fastest random access times, and highest reliability available. SAS drive modules features a point-to-point interconnect to each drive, enabling each drive to be electrically isolated from each other so that drives don't compete for bandwidth, and utilize a protocol that enables fast data transfer to and from the hard drive -- 3.0 gigabytes of data per second. Software and Hardware RAID options Mac OS X Server includes AppleRAID, providing RAID 0 and 1 support through software, allowing you to increase either data redundancy or performance. Xserve features on-line rebuilding of RAID 1 volumes and is able to boot from RAID volumes. Choose any combination of mirroring or striping across the three drive bays. RAID configurations require a minimum of two ADM hard drives. For increased protection and performance, add the Xserve RAID card to your Xserve, which provides hardware RAID 0, 1 and 5 with 256MB of cache and a 72-hour cache battery backup. Apple Drive Module SAS Compatibility SAS Apple Drive Modules are compatible only with the Intel-based Xserve. For drive module compatibility with other Xserve systems, please see http://docs.info.apple.com/article.html?artnum=107569 |
|
|
 | | On Sale
Now only: $2799.00
Mac Pro. 8 cores standard: Up to 3.2 GHz. The new Mac Pro is the fastest, most powerful Mac ever. Start building your Mac Pro with our suggested configuration: Two 2.8GHz Quad-Core Intel Xeon ?Harpertown? processors. 2GB memory (800MHz DDR2 fully-buffered DIMM ECC). ATI Radeon HD 2600 XT graphics with 256MB memory. 320GB Serial ATA 3Gb/s 7200-rpm hard drive. 16x double-layer SuperDrive. |
|
|
| | On Sale
Now only: $2899.00
Mac Pro. 8 cores standard: Up to 3.2 GHz. The new Mac Pro is the fastest, most powerful Mac ever. Start building your Mac Pro with our suggested configuration: Two 2.8GHz Quad-Core Intel Xeon ?Harpertown? processors. 2GB memory (800MHz DDR2 fully-buffered DIMM ECC). ATI Radeon HD 2600 XT graphics with 256MB memory. 320GB Serial ATA 3Gb/s 7200-rpm hard drive. 16x double-layer SuperDrive. |
|
|
 | | On Sale
Now only: $299.00
Mac Pro supports up to four 3Gb/s Serial ATA hard drives for up to 3TB of storage. The cable-free, direct-attach drive solution lets you install and remove drives in a snap. To install a drive, you connect a simple drive carrier to the hard drive, then just slide it into place no cables or connectors to hassle with. Removing the drive is just as easy. Every Mac Pro ships with four hard drive carriers. This solution is perfect if you ever share drives among different workstations at home or the studio. Requires Mac Pro and Mac OS X v10.4.9 or later. Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Apple's Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service. |
|
|
 | | On Sale
Now only: $199.00
Mac Pro supports up to four 3Gb/s Serial ATA hard drives for up to 4TB of storage. The cable-free, direct-attach drive solution lets you install and remove drives in a snap. To install a drive, you connect a simple drive carrier to the hard drive, then just slide it into place no cables or connectors to hassle with. Removing the drive is just as easy. Every Mac Pro ships with four hard drive carriers. This solution is perfect if you ever share drives among different workstations at home or the studio. Requires Mac Pro and Mac OS X v10.4.9 or later. Note: Products sold through this website that do not bear the Apple Brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Apple's Limited Warranty does not apply to products that are not Apple-branded, even if packaged or sold with Apple products. Please contact the manufacturer directly for technical support and customer service. |
|
|
 | | On Sale
Now only: $799.00
The Mac Pro RAID Card offers improved storage performance and data protection to your Mac Pro system up to 304MB/s of sequential read performance in RAID 0. Ideal for video and creative professionals with demanding storage needs as well as for tower server applications, this hardware RAID option supports RAID levels 0, 1, 5, 0+1, and Enhanced JBOD. It has 256MB of cache and an integrated 72-hour battery for protecting the RAID cache. The card occupies the top PCI Express slot (slot 4) and connects to the four internal drive bays. To enable your Mac Pro for hardware RAID, install the Mac Pro RAID Card and two or more hard drives in bays 1 through 4. Each RAID level has minimum requirements for the number of hard drives: RAID Level Drive Requirements Benefit Enhanced JBOD One to four drives A non-RAID configuration with the ability to migrate to a RAID set at any time RAID 0 (striping) Two to four hard drives Maximum performance and capacity for the most demanding I/O requirements RAID 1 (mirroring) Two hard drives Maximum protection for critical data RAID 5 Three or four hard drives Data protection, up to 199MB/s of sequential read performance, and efficient capacity utilization RAID 0+1 Four hard drives A mirror of striped drive pairs providing performance and data protection The Mac Pro RAID Card supports the creation of multiple RAID sets in a system and multiple volumes per RAID set. For optimal disk utilization in a RAID set, all hard drives should be the same size. Using Apple's RAID Utility software (included with Mac OS X v10.5), you can migrate the drives into a RAID set without reinstalling Mac OS X or reformatting the drives, and you can customize your RAID volumes to meet your exact requirements. Please note: The Mac Pro RAID Card occupies the top PCI Express expansion slot (slot 4). |
|